This is a simple trick to use notepad as a diary.

Did you know that you can also use Notepad as a simple digital diary or a
personal Log-Book ? Well, if you didn’t then follow the below mentioned
steps to make one for yourself !
Steps
1. Open Notepad.
2. Type .LOG (in capital letters) and hit enter.
Save it with any name and close it.
Open it again.

When you open the file again you will see the current date and time being
inserted automatically after the .LOG line. This will happen automatically
every time you reopen the the notepad file.

How To Change UR IP ADDRESS

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "cmd" and hit ok You should now be at an MSDOS prompt
screen.
4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your
desktop.
7. Click on "properties
You should now be on a screen with something titled "Local Area
Connection", or something close to that, and, if you have a network
hooked up, all of your other networks.
8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under
the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2
until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask"
section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

Increase Ur Internet Speed Up To 300%(Firefox Only)

This is a short trick on how to increase your internet 300% Faster or higher.

So That You Can =>

* Increase your browsing experience
* Play online games LAG free
* Load videos almost instantly
* Turn your slow internet connection into Broadband DSL or even T1
* Download anything faster with our “intelligent packet configurator”
* Increase Speeds Up To 375% Faster!

PLEASE NOTE: Only works for Mozilla Firefox

1) Open Mozilla Firefox.

2) In address bar type: “about:config”

3)Look for were it says “network.http.pipelining” to TRUE
(Double Click it until it says TRUE)

4)Look for “network.http.proxy.pipelining” to TRUE
(Same way as stated above)

5) Now. Right-Click Anywhere then click “Create New” Then “Integer”. Name it “nglayout.initialpaint.delay”
Then Click Ok, then put the number “0″ (Zero) in the next box

6) Click OK,

7) Restart Firefox.
Feel The Difference in Speed

Thanks for reading!!

Open blocked website

This is the very new and 100% working tricks for access blocked websites like
FACEBOOK
ORKUT
YOUTUBE etc

The trick behind block these websits is to block their proxies.



So now come to the trick.

There is a new world wide web circumstance is come to way is https://
For open a blocked website you have to put https:// before that website like this.


https://www.facebook.com//

Crack trail software without any serial key

Have you ever downloaded a software but it was trial?
After sometime it had expired,
but you still needed it? Well, if
you want to activate it
without serial key, then you need a crack. Nowadays most
of the security information is
stored in files called DLL.
By modifying the DLL, you can get access to the software
without a key.
Today you will learn how.

—————————————-
Programs that you’ll need to get started : CrackedDLL 3.1.5.0
—————————————-

1 Quit the software you want to crack.

2 Go to the installation folder.
(Usually 'C:\Program Files \"name"')

3 Close all the other folders.

4 Launch 'CrackedDLL 3.1.5.0'(See tips for more info).

5 Once started click 'Scan Open Folder'.

6 CrackedDLL will now display the 'security' DLL.

7 After you see a Green Check Mark click modify selected DLL.

8 Read and Agree to the terms.

9 Wait for the process to finish, once finished a message will be displayed.

10 Relaunch the software you want to crack.

11 The software is now cracked.

—————————————-
If the crack didn't work
—————————————-

1 If you did the above steps and the crack didn't work restart your computer.

2 The software is now cracked.

3 In case of any problems repeat the steps from the start

Shut down Remote pc Using ip address

Step 1: Before going to start clear all history, all cookies, stop all downloading and close all extra tabs. Mean to say stop all internet activities. Now go to your messanger and start chating with the victim.

Step 2: Go the start and click on run.

Step 3: In run command type cmd.exe and hit enter.

Step 4: A black screen will appear. This is command prompt. In this box type "netstat -n" (without quotes).

Step 5: Now if you done the step one correctly you see only one ip address many times (ip should be of victim).

Step 6: Now again, type "shutdown -i"(without quotes). A box will appear now click on add button. A small box will pop up. Now type ip address of computer which you get from "netstat -n" command.

Step 7: Now there are three options click on shutdown.

Step 8: To show a message to victim's computer check the "warm users of the action" and set the number of seconds.

Step 9: Now select any option in shutdown event tracker

Step 10: Now comes the best part of the prank. In last type your message
like you got hacked and we are going to
destroy your computer.